Q1.5 FE
In 1993, the international Child Dummy Working Group started the development of a Q series of child dummies as a successor to the P-series. The Q1.5 child dummy development started with the CHILD (Child Injury Led Design) project from 2002 through 2004.
The Q dummies have improved biofidelity over the P-series. The Q dummy is designed as a tool to evaluate the protection of vehicle child restraints in frontal, rear, and side impact and rollover crash conditions. The Q1.5 dummy is used for both homologation and research purposes.
The model is validated to certification tests in both frontal and lateral directions. The Q1.5 APTS (Abdomen Pressure Twin Sensor) model was introduced and validated at two impact speeds. The abdomen pressure sensors are required for ADAC child seat consumer rating and C-NCAP full-frontal width testing starting in 2021.
Humanetics offers highly detailed and validated Q1.5 models in ANSYS LS-DYNA, PAM-CRASH, and RADIOSS Finite Element codes.
Specifications
Solver Code & Version Number
| MODEL | ANSYS LS-DYNA | PAM CRASH | RADIOSS | ABAQUS |
|---|---|---|---|---|
| Q1.5 FE | 1.2 | 1.2 | 1.1 | N/A |
Product Specifications
Regulations
| WHERE USED | DEFINING REGULATION |
|---|---|
| ANCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| ASEAN NCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| C-NCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| Euro NCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| KNCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| Latin NCAP | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
| UN R129 | E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129 |
Licensing
- Annual License
The model is leased for a period of one year and renewable on its anniversary of purchase. Model support and upgrades are provided during this period.
- Licensing Procedure
Licenses are provided on a per-site basis and require the execution of a model license agreement between the customer and Humanetics. Usage of the model is limited to the site listed on the license agreement. For full terms and conditions please request a sample license agreement for your review.
- Humanetics Finite Element Dummy Model Distributors
The Humanetics Finite Element dummy models are distributed worldwide through a network of distributors associated with the solver code and experts in the field of occupant safety simulation, who provide local customer support, training, and arrange licensing.
DISTRIBUTORS
| SOLVER | REGION | DISTRIBUTOR | CONTACT | PHONE | |
|---|---|---|---|---|---|
| ANSYS LS-DYNA | North America, South America | Humanetics | Indrani Gadgil | +1 248 778 2360 | [email protected] |
| Mainland China and Taiwan | Humanetics China | Jie Han | +86 21 60901300 | [email protected] | |
| India, Malaysia, Australia, Vietnam | Humanetics India | Mahendra Kurkuri | +91 80 6814 6430 | [email protected] | |
| UK | Humanetics Europe | Nenad Dimitric | +49 172 565 2232 | [email protected] | |
| France | Dynamore France | Nima Edjtemai | +33 6 86 08 59 58 | [email protected] | |
| Germany and Surrounding regions | Dynamore Germany | Ulrich Franz | +49 5082 9140051 | [email protected] | |
| Sweden | Dynamore Sweden | Marcus Redhe | +46 70 55 131 42 | [email protected] | |
| Japan | Humanetics Japan | Takahiko Sugiyama | +81 70 3852 7004 | [email protected] | |
| Japan | JSOL Corporation | Takashi Murakami | +81 3 5859 6020 | [email protected] | |
| Korea | JAT CO., LTD. | In-Sang Yoo | +82 31 726-5033 | [email protected] | |
| RADIOSS | Global distributor | Altair Engineering, Inc. | Franck Njilie | +33 1 41 33 09 90 | [email protected] |
| ABAQUS | Global distributor | Humanetics | Indrani Gadgil | +1 248 778 2360 | [email protected] |
| PAM-CRASH | Global distributor | ESI-Group. | <a href="https://www.esi-group.com/">Refer to the ESI-Group Website</a> | ||
CAD
Humanetics offers surfaced 3D CAD models for use in vehicle packaging studies using major common CAD systems. The models are available in IGES Format for import to CATIA, Pro/Engineer, IDEAS, Unigraphics, PDGS and other IGES compatible systems. The models are derived from the Humanetics family of finite element dummy models and 3-D dummy design geometry. CAD models are only offered as a paid-up license.
Model Name | Detailed |
THOR-50M USNCAP | X |
| THOR-50M EuroNCAP | X |
| THOR-5F | X |
Hybrid III 5th | X |
Hybrid III 50th | X |
Hybrid III 95th | X |
WSID 50th | X |
EuroSID-1 |
|
ES2 | X |
ES2re | X |
US-SID |
|
SID2s SBL "D" | X |
Hybrid III 3YO | X |
Hybrid III 6YO | X |
Hybrid III 10YO |
|
Q0 | X |
Q1 | X |
Q1.5 | X |
Q3 | X |
Q10 Euro NCAP 2020 | X |
Q10 Euro NCAP 2020 SK | X |
P3 | X |
Free Motion Headform | X |
Ejection Mitigation Headform | X |
Flex-PLI Regulated | X |
Bodyblock-SAE J944A | X |
In case the model you need is not listed, please contact CAE Department for our development and release schedule.