q6_iso.jpg

Q6 FE

The Q6 is an advanced Q series dummy representing a 6-year-old child. In 1993 the international Child Dummy Working Group began the development of a Q series of child dummies as a successor to the P-series. Part of the development and evaluation of the Q-dummies took place within European Research programs CREST1, CHILD2, CASPER3, and EPOCh4, all aiming to improve child safety in cars.

The Q6 dummy is suitable for frontal as well as side impact CRS evaluations and is used for homologation, consumer rating, and research purposes.

The model is validated and calibrated to certification tests.

The Q6 APTS (Abdomen Pressure Twin Sensor) model is validated at two impact speeds. The abdomen pressure sensors are required for ADAC child seat consumer rating and C-NCAP full-frontal width testing starting in 2021.

Humanetics offers highly detailed and validated Q6 models in ANSYS LS-DYNA, PAM-CRASH, ABAQUS, and RADIOSS Finite Element codes.

Specifications
MODEL
Q6 APTS FE
ANSYS LS-DYNA2.5
PAM CRASH2.1.2
RADIOSS2.1.2
ABAQUSNA
MODEL ANSYS LS-DYNA PAM CRASH RADIOSS ABAQUS
Q6 APTS FE 2.5 2.1.2 2.1.2 NA
WHERE USED
ANCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
ASEAN NCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
C-NCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
Euro NCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
KNCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
Latin NCAP
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
UN R129
DEFINING REGULATIONE/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
WHERE USED DEFINING REGULATION
ANCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
ASEAN NCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
C-NCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
Euro NCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
KNCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
Latin NCAP E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
UN R129 E/ECE/324/Rev.2/Add.128 E/ECE/TRANS/505/Rev.2/Add. 128 Annex 8. UN R129
Licensing
  1. Annual License

    The model is leased for a period of one year and renewable on its anniversary of purchase. Model support and upgrades are provided during this period.

     
  2. Licensing Procedure

    Licenses are provided on a per-site basis and require the execution of a model license agreement between the customer and Humanetics. Usage of the model is limited to the site listed on the license agreement. For full terms and conditions please request a sample license agreement for your review.

     
  3. Humanetics Finite Element Dummy Model Distributors

    The Humanetics Finite Element dummy models are distributed worldwide through a network of distributors associated with the solver code and experts in the field of occupant safety simulation, who provide local customer support, training, and arrange licensing.
DISTRIBUTORS
SOLVER
ANSYS LS-DYNA
REGIONNorth America, South America
DISTRIBUTORHumanetics
CONTACTIndrani Gadgil
PHONE+1 248 778 2360
EMAILigadgil@humaneticsgroup.com
Mainland China and Taiwan
REGIONHumanetics China
DISTRIBUTORJie Han
CONTACT+86 21 60901300
PHONEjhan@humaneticsatd.com
India, Malaysia, Australia, Vietnam
REGIONHumanetics India
DISTRIBUTORMahendra Kurkuri
CONTACT+91 80 6814 6430
PHONEmkurkuri@humaneticsatd.com
UK
REGIONHumanetics Europe
DISTRIBUTORNenad Dimitric
CONTACT+49 172 565 2232
PHONENDimitric@humaneticsgroup.com
France
REGIONDynamore France
DISTRIBUTORNima Edjtemai
CONTACT+33 6 86 08 59 58
PHONEnima.edjtemai@ansys.com
Germany and Surrounding regions
REGIONDynamore Germany
DISTRIBUTORUlrich Franz
CONTACT+49 5082 9140051
PHONEuli.franz@ansys.com
Sweden
REGIONDynamore Sweden
DISTRIBUTORMarcus Redhe
CONTACT+46 70 55 131 42
PHONEmarcus.redhe@ansys.com
Japan
REGIONHumanetics Japan
DISTRIBUTORTakahiko Sugiyama
CONTACT+81 70 3852 7004
PHONEtsugiyama@humaneticsatd.com
Japan
REGIONJSOL Corporation
DISTRIBUTORTakashi Murakami
CONTACT+81 3 5859 6020
PHONEmiyachi.takahiko@jsol.co.jp
Korea
REGIONJAT CO., LTD.
DISTRIBUTORIn-Sang Yoo
CONTACT+82 31 726-5033
PHONEisyoo@jatweb.co.kr
RADIOSS
REGIONGlobal distributor
DISTRIBUTORAltair Engineering, Inc.
CONTACTFranck Njilie
PHONE+33 1 41 33 09 90
EMAILfnjilie@altair.com
ABAQUS
REGIONGlobal distributor
DISTRIBUTORHumanetics
CONTACTIndrani Gadgil
PHONE+1 248 778 2360
EMAILigadgil@humaneticsgroup.com
PAM-CRASH
REGIONGlobal distributor
DISTRIBUTORESI-Group.
CONTACTRefer to the ESI-Group Website
SOLVERREGIONDISTRIBUTORCONTACTPHONEEMAIL
ANSYS LS-DYNANorth America, South AmericaHumanetics Indrani Gadgil+1 248 778 2360igadgil@humaneticsgroup.com
Mainland China and TaiwanHumanetics ChinaJie Han+86 21 60901300jhan@humaneticsatd.com
India, Malaysia, Australia, VietnamHumanetics IndiaMahendra Kurkuri+91 80 6814 6430mkurkuri@humaneticsatd.com
UKHumanetics EuropeNenad Dimitric+49 172 565 2232NDimitric@humaneticsgroup.com
FranceDynamore FranceNima Edjtemai+33 6 86 08 59 58nima.edjtemai@ansys.com
Germany and Surrounding regionsDynamore GermanyUlrich Franz+49 5082 9140051uli.franz@ansys.com
SwedenDynamore SwedenMarcus Redhe+46 70 55 131 42marcus.redhe@ansys.com
JapanHumanetics JapanTakahiko Sugiyama+81 70 3852 7004tsugiyama@humaneticsatd.com
JapanJSOL CorporationTakashi Murakami+81 3 5859 6020miyachi.takahiko@jsol.co.jp
KoreaJAT CO., LTD.In-Sang Yoo+82 31 726-5033isyoo@jatweb.co.kr
RADIOSSGlobal distributorAltair Engineering, Inc.Franck Njilie+33 1 41 33 09 90fnjilie@altair.com
ABAQUSGlobal distributorHumaneticsIndrani Gadgil+1 248 778 2360igadgil@humaneticsgroup.com
PAM-CRASHGlobal distributorESI-Group.Refer to the ESI-Group Website
CAD

Humanetics offers surfaced 3D CAD models for use in vehicle packaging studies using major common CAD systems. The models are available in IGES Format for import to CATIA, Pro/Engineer, IDEAS, Unigraphics, PDGS and other IGES compatible systems. The models are derived from the Humanetics family of finite element dummy models and 3-D dummy design geometry. CAD models are only offered as a paid-up license. 

 

Model Name

THOR-50M USNCAP

Detailed

X
THOR-50M EuroNCAP

Detailed

X
THOR-5F

Detailed

X

Hybrid III 5th

Detailed

X

Hybrid III 50th

Detailed

X

Hybrid III 95th

Detailed

X

WSID 50th

Detailed

X

EuroSID-1

Detailed

 

ES2

Detailed

X

ES2re

Detailed

X

US-SID

Detailed

 

SID2s SBL "D"

Detailed

X

Hybrid III 3YO

Detailed

X

Hybrid III 6YO

Detailed

X

Hybrid III 10YO

Detailed

 

Q0

Detailed

X

Q1

Detailed

X

Q1.5

Detailed

X

Q3

Detailed

X

Q10 Euro NCAP 2020

Detailed

X

Q10 Euro NCAP 2020 SK

Detailed

X

P3

Detailed

X

Free Motion Headform

Detailed

X

Ejection Mitigation Headform

Detailed

X

Flex-PLI Regulated

Detailed

X

Bodyblock-SAE J944A

Detailed

X

Model Name

Detailed

THOR-50M USNCAP

X
THOR-50M EuroNCAPX
THOR-5FX

Hybrid III 5th

X

Hybrid III 50th

X

Hybrid III 95th

X

WSID 50th

X

EuroSID-1

 

ES2

X

ES2re

X

US-SID

 

SID2s SBL "D"

X

Hybrid III 3YO

X

Hybrid III 6YO

X

Hybrid III 10YO

 

Q0

X

Q1

X

Q1.5

X

Q3

X

Q10 Euro NCAP 2020

X

Q10 Euro NCAP 2020 SK

X

P3

X

Free Motion Headform

X

Ejection Mitigation Headform

X

Flex-PLI Regulated

X

Bodyblock-SAE J944A

X

 

In case the model you need is not listed, please contact CAE Department for our development and release schedule.